Pro 100 9mm Leads; SB Chev, Male Cap, Over Covers

283 - 400 Chevrolet Engines; 90 Deg Spark Plug Boots

Please call us on 1300 722 580 if you would prefer to place your order over the phone

Available Options
Lead Colour Choice
Distributor Post in Car
Coil Post in Car

Need Extras?

4200 Pro Series Race Coil - N.A. Engines

$185.00

Add to my order

Add To Cart

Calculate Shipping

Startrack 3kg Post Satchel - $16.50

9CHE801 - Small Block Chevrolet, MALE Dist & Coil, over rocker covers

The ICE Ignition 9CHE801 Pro 100 Ignition Leads suit all Small Block Chevrolet 283 to 400 V8 engines with:

MALE Post Distributor MALE Post Coil

90 Deg. Spark Plug Boots fitment over the rocker covers

You can tailor this lead set to suit your needs at no further cost. You can change the following.

Lead Colour: BLACK (default), RED, BLUE
Distributor Post in Car: MALE POST (default), FEMALE POST
Coil Post in Car: MALE POST (default), FEMALE POST

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

More spark means a bigger explosion in the combustion chamber, this improves performance.
ICE Ignition leads / Plug Wires ensure this by minimising resistance in the leads.
They are super conductive with an ultra-low resistance of 100 ohms per metre.
ICE Ignition Leads / Plug Wires are made from the high quality ultra-low resistance spiral wound copper alloy core.
They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
The boots are made from extreme temperature silicone insulation and can withstand high temperatures.
The ICE Ignition 9CHE801 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!

WHAT'S IN THE BOX?

8 x ICE Ignition 9CHE801 Pro 100 Series Ignition Leads
1 x ICE Ignition 9CHE801 Pro 100 Series Coil Lead
1 x ICE Ignition 2800 Plug Wire Markers
Instruction Sheet
"ICE Ignition Plug Wires" Sticker

(9CHE801)

Product Features & Benefits

All ICE Ignition Pro 100 Series Ignition Leads / Plug Wire sets feature:

Spiral wound copper alloy core with an ultra-low resistance of 100 ohms per metre (35 ohms per foot).
Delivers maximum spark and duration for improved performance.
Built in Radio Frequency Interference (RFI) minimization.
All boots made from extreme temperature silicone to withstand high temperatures.
Premium quality "Snap Lock" stainless steel Spark Plug, Distributor Cap & Coil fittings.
Numbered Plug Wire Markers with easy to install tool ensures your leads are always fitted correctly.
Ready to install for each specific engine application. No cutting or terminating of leads required.

**ICE Ignition 9CHE801 Pro 100 Ignition Leads / Plug Wires Small Block Chevrolet**
Engine Type:	283 to 400 Chev V8 Engines
Lead Diameter:	9 mm
Lead Colour Choice:	BLACK, RED or BLUE
Lead Resistance:	100 Ohms per metre
RFI Suppressive Leads:	Yes
Lead Conductor:	Spiral wound copper alloy core
Distributor, Spark Plug & Coil Boot Insulation:	Extreme temperature silicone
Distributor Boot Type:	90 Degrees
Coil Boot Type:	90 Degrees
Spark Plug Boot Type:	90 Degrees
Distributor Cap Type:	Select between MALE or FEMALE Post
Coil Type:	Select between MALE or FEMALE Post
Ignition Lead / Plug Wire fitment:	Over the Rocker Covers
Plug Wire Markers with easy to install tool:	Included

SKU	9CHE801
Brand	ICE Ignition
Shipping Weight	1.2000kg
Shipping Width	0.280m
Shipping Height	0.070m
Shipping Length	0.210m
Shipping Cubic	0.004116000m3
Unit Of Measure	mm

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.

The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchanability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.

Be The First To Review This Product!

Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.

Write a product review