Lee's Backing Plate - 0, 15 & 30 DEG HEAVY Rod Holders
100 mm x 140 mm Stainless Steel Backing Plate
Provides maximum strength; accommodates gunwales up to 44 mm thick
Lee's Backing Plate (100mm x 140mm) for HEAVY 0, 15, or 30 degrees Rod Holders
Please Note: The Lee's Rod Holder Backing Plates are ONLY compatible with the Lee's Tackle Flush Mounted Rod Holders. Please do NOT buy this product if you have any other brand of flush-mounted rod holders as the dimensions and hole spacing are not compatible
Constructed from heavy gauge 316 stainless steel with built-in safety eyes on both sides. This backing plate accommodates the HEAVY 0, 15, or 30 degrees Rod Holders rod holders for gunwales up to 44 mm thick. The kit includes stainless bolts, lock-nuts and washers for maximum strength installation. The Backing Plate Dimensions are 100mm x 140mm
The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder Specialist for over 50 years. For the “Bullet Proof Installation” please consider using our stainless steel backing plates.
WHAT'S IN THE BOX?
- 1 x Lee's Backing Plate (100mm x 140mm) for HEAVY 0, 15, or 30 Degree Rod Holders only (RH5930)
- Stainless Steel bolts, locknuts and washers
(RH5930)
SKU | RH5930 |
Barcode # | 36433137235 |
Brand | Lee's Tackle |
Shipping Weight | 1.3000kg |
Shipping Width | 0.350m |
Shipping Height | 0.250m |
Shipping Length | 0.320m |
Shipping Cubic | 0.028000000m3 |
Unit Of Measure | ea |
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Be The First To Review This Product!
Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.
You May Also Like

Lee's 15 Deg HEAVY Rod Holder
$191.25 WAS 225
Or BUY NOW with 4 interest-free fortnightly payments of $47.81

Lee's 30 Deg HEAVY Rod Holder
$191.25 WAS 225
Or BUY NOW with 4 interest-free fortnightly payments of $47.81

Lee's 0 Deg HEAVY Rod Holder - Bar Pin
$186.58 WAS 219.5
Or BUY NOW with 4 interest-free fortnightly payments of $46.65

Lee's 0 Deg HEAVY Rod Holder - Swivel Base
$279.65 WAS 329
Or BUY NOW with 4 interest-free fortnightly payments of $69.91
More From This Category

Lee's 30 Deg MEDIUM Rod Holder
$135.58 WAS 159.5
Or BUY NOW with 4 interest-free fortnightly payments of $33.90

Heavy Duty Rod Holder
$143.65 WAS 169
Or BUY NOW with 4 interest-free fortnightly payments of $35.91

Heavy-Duty Trolling Unit
$288.15 WAS 339
Or BUY NOW with 4 interest-free fortnightly payments of $72.04

Horizontal Rod Holders
$203.15 WAS 239
Or BUY NOW with 4 interest-free fortnightly payments of $50.79

Lee's 0 Deg HEAVY Rod Holder - Bar Pin
$186.58 WAS 219.5
Or BUY NOW with 4 interest-free fortnightly payments of $46.65