Lee's 0 Deg HEAVY Rod Holder - Swivel Base

For bent butt rods with spinning class to 68 kg (150 lb)

Need Extras?

Power Handle #8 - Tiagra 20/30 & TLD 30/50

$89.95

Add to my order

Power Handle #9 - Tiagra 50 & 80

$79.95

Add to my order

Lee's Rod Butt Extender

$33.96

Add to my order

Go Pro Mount with Long Thumb Knob

$80.33

Add to my order

Add To Cart

Calculate Shipping

Free Shipping - $0.00

Lee's Tackle RH577V Stainless Steel Heavy-Duty 0 Degree Flush Mount Boat Rod Holder with Swivel Base

The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder Specialist for over 50 years. Cast from high-grade stainless steel and set to an angle of 0 degrees or vertical with a 2 1/4" (57 mm) outside diameter this rod holder is designed for a heavy size spinning class to 68 kg (150 lb). It also has a swivel base to accommodate large curved/bent butt rods.

WHAT'S IN THE BOX?

1 x Lee's Tackle RH577V Heavy-Duty 0 DEG Flush Mount Boat Rod Holder with Swivel Base

(RH577V)

**Lee's Tackle RH577V Heavy Duty 0 DEG Flush Mount Boat Rod Holder - Swivel Base**
Mount Type:	Flush Mount
Rod Holder Angle:	0 Degrees / Vertical
Outside Diameter:	57 mm (2.25")
Rod Holder Overall Length:	295 mm (11.6")
Face Plate Width:	101 mm (4")
Face Plate Hieght:	127 mm (5")
Spinning Class:	Up to 68 kg (150lb)

SKU	RH577V
Barcode #	96811517707
Brand	Lee's Tackle
Shipping Weight	2.4000kg
Shipping Width	0.650m
Shipping Height	0.350m
Shipping Length	0.350m
Shipping Cubic	0.079625000m3
Unit Of Measure	ea

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.