Lee's Backing Plate - 0, 15 & 30 DEG MEDIUM Rod Holders

90mm x 120mm Stainless Steel Plate for MED Rod Holders

For a “Bullet Proof Installation”; accommodates gunwales up to 38 mm thick

Need Extras?

Lee's 15 Deg MEDIUM Rod Holder

$149.50

Add to my order

Lee's 30 Deg MEDIUM Rod Holder

$159.50

Add to my order

Add To Cart

Calculate Shipping

Lee's Backing Plate (90mm x 120mm) for MED 0, 15, or 30 degrees Rod Holders

Please Note: The Lee's Rod Holder Backing Plates are ONLY compatible with the Lee's Tackle Flush Mounted Rod Holders. Please do NOT buy this product if you have any other brand of flush-mounted rod holders as the dimensions and hole spacing are not compatible

For the “Bullet Proof Installation” please consider using Lee's stainless steel backing plates. Constructed from heavy gauge 316 stainless steel they have built-in safety eyes on both sides. This backing plate accommodates the MEDIUM 0, 15, or 30 degrees Rod Holders in gunwales up to 38 mm thick. The kit includes stainless bolts, locknuts and washers for a maximum strength installation. The Backing Plate Dimensions are 90mm x 120mm

The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder Specialist for over 50 years.

WHAT'S IN THE BOX?

1 x Lee's Backing Plate (90mm x 120mm) for MEDIUM 0, 15, or 30 Degree Rod Holders only (RH5931)
Stainless Steel bolts, locknuts and washers

(RH5931)

SKU	RH5931
Barcode #	96811590038
Brand	Lee's Tackle
Shipping Weight	1.0000kg
Shipping Width	0.350m
Shipping Height	0.250m
Shipping Length	0.250m
Shipping Cubic	0.021875000m3
Unit Of Measure	ea

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.