7 Amp 1 STEP - ALL Early Holden 6 Engines , Carby, N.A.

FREE ICE 2316 VOLTAGE BOOSTER WITH THIS KIT, $275 VALUE

$1,545.00
In Stock

More info.

Or BUY NOW with 4 interest-free fortnightly payments of $386.25 .


Available Options


Free Shipping - $0.00

7 AMP 1 STEP Kit - All Early Holden 6's (Red, Blue & Black, 161 to 202), N.A.

This ICE Ignition kit suits ALL Early Holden 6 Engines from the Holden 161 Through To The Holden 202 6 Cylinder Engines fitted with:

  • Carburettor(s) - including electronic carburettor(s).
  • No forced induction or nitrous.

This ICE Ignition kit is ideal for most street & race cars. The Rev Limiter provides insurance against accidentally over-revving your engine. This kit can also be used with electronic carburettors that control "Air & Fuel" only. The Digital Inductive Spark technology delivers the most powerful spark and longest duration of any ignition system on the market. More spark means greater tuneability which leads to improved performance.

FREE ICE 2316 Voltage Booster

Included with our ICE Ignition Kits to suit Carburettored engines is the ICE Ignition 2316 Voltage Booster. Capable of delivering 16 volts regardless of the quality of your car's electrical system the ICE Ignition 2316 Voltage Booster is a simple "Plug & Play" device. Just plug it into the ICE Ignition wiring loom and the Voltage Booster does the rest. Get your FREE ICE 2316 Voltage Booster only at Gear Campus, that's $275 of value for FREE.

The ICE Ignition 7 AMP 1 STEP Control Box

 

The ICE Ignition 7061MV Street Series Control Box features the following.

  • 16 Pre-programmed ignition curves - 16 push-button selectable ignition curves enable total timing adjustment in real-time. It features 8 FAST Timing Advance Curves and 8 SLOW Timing Advance Curves
    • It eliminates the need for distributor re-graphing when engine upgrades are introduced.
    • It also enables total timing adjustment in real-time for changes in fuel quality.
  • Vacuum Advance Manifold Absolute Pressure (MAP) Sensor - Advances timing up to 10 degrees under cruise conditions allowing the engine to run smoothly and improves fuel efficiency. MAP sensor use is optional, it won't impact ignition performance if not used.
  • Single Rev Limiter (1-STEP) - A push-button selectable rev limiter adjustable in 100 RPM increments. It provides great insurance against accidentally over-revving your engine by cutting out the spark.

The controller must be mounted inside your car, NOT inside your engine bay. ICE Ignition recommends the use of NON-RESISTOR Spark Plugs

Why choose the ICE Ignition 7061MV Kit?

  • The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market.
  • It's ideal for most street-driven cars and provides great tuneability.
  • Push-Button selectable timing makes distributor re-graphs obsolete.
  • Push-Button selectable Rev Limiter protects your engine from being accidentally overrevved.
  • It can also be used with electronic carburettors that control "Air & Fuel" only.
  • More spark means greater tuneability which leads to improved performance.
  • Three Year Australian Warranty, made in Melbourne

​​​​Our Value-Add Service

Need help with establishing a base tune for your engine? We can help with engine timing (i.e. base timing and curve selection), spark plug selection and spark plug gap for all customers that purchase an ICE Ignition kit through Gear Campus. Please contact us via eBay Message upon ordering your ICE Ignition kit.

What's in the ICE Ignition Kit?

This ignition kit includes the following

  1. 7061MV Controller - 16 pre-defined timing curves, Manifold Absolute Pressure (MAP) sensor & a push-button selectable rev limiter.
  2. 2316 Voltage Booster - Ensures 16 Volts are being delivered to the ignition system at all times
  3. ICE Ignition SMALL CAP (4" Diameter) Billet Distributor -  It's made from 6061 aircraft-grade aluminium and uses a “Hall Effect Sensor” to communicate with the Control Box. 
    • NYLON gear is fitted to the distributor. ​
  4. ICE Ignition 9HOL602 Pro 100 9 mm leads (Black)  - This a "Plug & Play" lead set with STRAIGHT Spark Plug Boots. Lead fitment is  AS PER FACTORY FITMENT. If a different lead set is required please contact us via eBay Message.
  5. ICE Ignition 4200 Pro Series Race Coil - It has twice the energy of a standard coil and is the ideal coil for naturally aspirated engines.​
  6. Wiring Loom - It's approx. 2 metres long and is easy to install. 

(IK71VASNHOL602)

Product Features & Benefits

* You will save money by not having to re-graph your distributor every time you upgrade your engine.

* More spark and duration delivers greater tune-ability leading to improved performance.

* MAP sensor delivers improved fuel economy under cruising conditions.

* Avoid engine pinging scenarios through bad fuel by instantly adjusting your engine's timing.

* Rev limiter provides insurance against over-revving saving you thousands of dollars in unwanted engine repairs.

* Three Year Warranty for street applications, Two Year Warranty for race applications

ICE Ignition 7 AMP 1 STEP Kit - Holden 186 to 202

Engine Type: Holden VC to VK Commodore 186 to 202
Fuel Delivery: Carburettor(s) - including Electronic Carburettor(s)
Air Delivery: Naturally Aspirated
Controller: 7 AMP 1 STEP
Controller Features: 16 curves, MAP Sensor, Rev Limiter
Wiring Loom: Included, approx 2 meters
Distributor Diameter: Approx 4"
Distributor Triggering: Hall Effect Sensor
Distributor Shaft: 4130 Chromoly
Distributor Gear: NYLON gear
Distributor Cap Type: HEI / MALE Post 
Dist. Plug Wire Retainer: Included
Spark Plug Boot Type:  Straight
Ignition Lead Diameter: 9 mm
Coil Type:  ICE Ignition 4200 Coil
Lead / Plug Wire fitment: Direct Factory Replacement
Lead Markers & install tool: Included

 

 

 

 

 

 

 

 

 

 

SKU IK71VASNHOL602
Brand ICE Ignition
Shipping Weight 9.2000kg
Shipping Width 0.460m
Shipping Height 0.380m
Shipping Length 0.380m
Shipping Cubic 0.066424000m3
Unit Of Measure ea

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2-year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.

The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchantability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.

Be The First To Review This Product!

Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category


6 x 4300 Pro LS1 Race Coils, Leads & Bracket

6 x 4300 Pro LS1 Race Coils, Leads & Bracket

$1,195.00

Or BUY NOW with 4 interest-free fortnightly payments of $298.75

See Options
7 Amp 1 STEP - 69-87 Holden 253 to 308, Carby, N.A.

7 Amp 1 STEP - 69-87 Holden 253 to 308, Carby, N.A

$1,595.00

Or BUY NOW with 4 interest-free fortnightly payments of $398.75

See Options
7 Amp 1 STEP - Holden 253-308 VN heads, Carby, N.A.

7 Amp 1 STEP - Holden 253-308 VN heads, Carby, N.A

$1,595.00

Or BUY NOW with 4 interest-free fortnightly payments of $398.75

See Options
7 Amp 1 STEP Boost Control Kit - 1969-87 Holden 253 to 308,

7 Amp 1 STEP Boost Control Kit - 1969-87 Holden 25

$1,690.00

Or BUY NOW with 4 interest-free fortnightly payments of $422.50

See Options
7 Amp 1 STEP Boost Control Kit - ALL Early Holden 6 Engines

7 Amp 1 STEP Boost Control Kit - ALL Early Holden

$1,640.00

Or BUY NOW with 4 interest-free fortnightly payments of $410.00

See Options
7 Amp 1 STEP Boost Control Kit - Holden 253-308 VN heads,

7 Amp 1 STEP Boost Control Kit - Holden 253-308 VN

$1,690.00

Or BUY NOW with 4 interest-free fortnightly payments of $422.50

See Options
7 Amp 2 STEP - 69-87 Holden 253 to 308, Carby, N.A.

7 Amp 2 STEP - 69-87 Holden 253 to 308, Carby, N.A

$1,750.00

Or BUY NOW with 4 interest-free fortnightly payments of $437.50

See Options
7 Amp 2 STEP - Holden 253-308 VN heads, Carby, N.A.

7 Amp 2 STEP - Holden 253-308 VN heads, Carby, N.A

$1,750.00

Or BUY NOW with 4 interest-free fortnightly payments of $437.50

See Options