The Trike Rack
Carries one trike rack; will suit most cars
Or BUY NOW with 4 interest-free fortnightly payments of $157.25 .
What's new for the 2021 SeaSucker Trike Rack
The 2021 SeaSucker Trike Rack includes the following:
- 2 Year Warranty - Only at Gear Campus. The manufacturer's warranty is 12 months.
- Spare Vacuum Pump - Think of it as a spare tyre in case you accidentally damage a vacuum mount.
- Redesigned vacuum pumps with red indicator bands - The indicator bands don't fade over time.
- Moulded rear wheel strap housing - Eliminates sideways movement. Velcro is used to strap the rear wheel.
- Spray Bottle & Microfibre Cloth - Only at Gear Campus. Use water, clean your car & the pads & moisten them before use.
The SeaSucker Trike Rack
The SeaSucker Trike Rack is specially made for all you three-wheelers out there. Two platforms with wheel hooks plus a wheel strap for your single wheel holds your trike secure on your car’s roof. Like all SeaSucker racks, it attaches and removes in seconds and fits on virtually any car (except convertibles). Its ultra-low profile design minimises wind noise whilst providing greater clearance to fit under carports and garages. The SeaSucker Trike Rack is compact enough to fit inside the boot of your car when not in use.
The SeaSucker Trike Rack uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. This allows you to temporarily but securely mount your Trike to the roof of your car without the hassle of a permanent bike rack. The SeaSucker vacuum mounts are non-marking, UV and weather-resistant, and hold exceptionally well to glass, metal or fibreglass surfaces.
The SeaSucker Trike Rack uses five 152 mm SeaSucker vacuum mounts packing a direct pull strength of 450 kg to overcome aerodynamic forces. Included in the standard kit is one Wheel Strap (152 mm SeaSucker vacuum mount with a hook-and-loop Velcro strap). The Wheel Strap secures your trike’s rear wheel.
WHAT'S IN THE BOX?
The SeaSucker Trike Rack Kit includes
- Trike Platforms - 2 x SeaSucker Trike Platforms each with 2 x 152 mm Vacuum Mounts pre-installed.
- Rear Wheel Strap - 1 x 152 mm SeaSucker Vacuum Mount with Double-Sided Velcro strap pre-installed.
- Protective Covers - 5 x 152 mm SeaSucker White Protective Covers.
- Spare Tyre - 1 x SeaSucker Black Vacuum Pump.
- Cleaning Kit - Aluminium Water Spray Bottle & Microfibre Cloth.
- Stainless Steel Hardware.
- Instruction Manual.
- 5 g Lube Tube for vacuum pump maintenance.
|Maximum Pull Rating (each):||90 kg|
|Load Carrying Capacity (each):||31.75 kg|
|Vacuum Mount Diameter:||152 mm|
|Vacuum Mount Height when in use:||46 mm|
|Vacuum Mount Height at rest:||56 mm|
|Housing Top Diameter:||60 mm|
|Housing Height Only:||33 mm|
|Housing Top Slot Width:||7 mm|
|Housing Top Slot Length:||14 mm|
|Housing Centre Thread:||¼-20|
|Unit Of Measure||mm|
We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Be The First To Review This Product!
Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.