SeaSucker Board Rack

Ideal for transporting Surfboards and more

Calculate Shipping

Free Shipping - $0.00

What's new for the SeaSucker Board Rack

The 2021 SeaSucker Board Rack includes the following:

2-Year Warranty - All Gear Campus sold Board Racks come with a 2-year warranty. The manufacturer's warranty is 12 months.
Spare SeaSucker Vacuum Pump - Think of it as a spare tyre in case you accidentally damage a vacuum mount.
Tools - Allen/Hex Key & 7/16" Spanner to assemble the board rack.
Redesigned vacuum pumps with red indicator bands - The indicator bands are impregnated into the pump, this prevents fading of the indicator band.
Aluminium Spray Bottle & Micro-Fibre Cloth - Only at SeaSucker Down Under. Fill with water only, clean your car and the vacuum pads & moisten them prior to use.

The SeaSucker Board Rack

The SeaSucker Board Rack has fixed HDPE bars that are 79 cm wide. It has six 152 mm SeaSucker Vacuum Mounts with 540 kg of holding power. To ensure your load stays put the kit comes with two 3 metre adjustable straps. Each bar is fitted with 56 cm wrap-around pads.

The SeaSucker Board Rack is great for transporting surfboards or anything that fits within the fixed bars. It's robust enough to carry almost anything at speeds up to 113 km/h (70 mph). Installation takes less than one minute and removal takes only seconds.

No more having to live with an ugly roof rack permanently bolted to your car creating wind noise and hurting your fuel economy. It is the only roof rack system you can use on your car, your friend's car, your partner's car and the car you intend to buy in the future.

The Board Rack / Roof Rack kit also comes with a spare 152 mm SeaSucker Vacuum Mount, it's a spare tyre. Keep it with your rack in case you accidentally damage a vacuum mount. Some assembly may be required. Tools included: 5/32″ Allen/Hex Key and 7/16″ Spanner.

WHAT'S IN THE BOX?

The SeaSucker Board Rack / Roof Rack Kit includes

- Board Rack Bars - 2 x HDPE Bars (79 cm wide), 2 x HDPE front platforms & 6 x 152 mm Vacuum Mounts (Pre-installed).
- Wrap Around Pads - 2 x 56 cm Wrap Around Pads.
- Tie-Down Straps - 2 x 3,000 mm Adjustable Straps.
- Spare Tyre - 1 x SeaSucker Black Vacuum Pump (Spare).
- Protective Covers - 7 x 152 mm SeaSucker White Protective Covers
- Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth
- 1 x 5g Lube Tube for vacuum pump maintenance.
- Marine-Grade Stainless Steel Hardware
- Instruction Manual

(BX1806)

Product Features & Benefits

You will save money by not having to buy a new roof rack every time you change cars
Use the same roof rack on your car, your partner's car or even a rental car
The easiest to install roof rack on the market; install it in a few minutes, remove it in seconds.

**SeaSucker Board Rack / Roof Rack Specifications**
Outside Width including vacuum mounts:	795 mm
Inside Width between the vacuum mounts:	490 mm
Minimum height when mounted, not including the wrap-around pads	42 mm
Minimum height when mounted, including the wrap-around pads	21 mm
Maximum height when mounted, not including the wrap-around pads	61 mm
Maximum height when mounted, including the wrap-around pads	82 mm
Product Weight:	6.7 kg
Speed Rating:	113 kph
Weight Rating:	45 kg

SKU	BX1806
Barcode #	810046210185
Brand	SeaSucker
Shipping Weight	8.4000kg
Shipping Width	0.400m
Shipping Height	0.280m
Shipping Length	0.900m
Shipping Cubic	0.100800000m3
Unit Of Measure	ea

We offer a 2 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 2 years of the date of original purchase to Gear Campus Pty Ltd for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.