RAM Tab-Tite™ Universal Clamping Cradle for the Samsung Tab A & 9.7" Tablets
For the Samsung Tab A WITH and WITHOUT a skin or sleeve
RAM Holder for Samsung Tab A & 9.7" Tablets with case or sleeve
The RAM-HOL-TAB28U has support cups designed to suit the Samsung Tab A Series and other 9.7" Tablets. The cradle consists of a spring-loaded back plate making it easy to load and unload your tablet. Once loaded the RAM-HOL-TAB28U keeps your tablet secure while on the go.
Interchangeable cup ends are designed to optimize the functionality of your table. The interchangeable cup ends allow for easy access to audio jacks, USB, power, and other ports. This ensures your tablet can be used just as it was intended. Perfect for stationary or on the go applications, the RAM-HOL-TAB28U is just what you need to get the most out of your tablet.
Included is a set of four nuts and bolts to connect the holder to any RAM components or mounts that contain the universal AMPs hole pattern.
The Tab-Tite™ RAM-HOL-TAB28U cradle is compatible with any tablet of the tablets below
iPad 9.7 (2017)
ZenPad 3S 10
MediaPad T3 10
G Pad II 10.1
G Pad X 10.1
G Pad X II 10.1
Galaxy Tab A 9.7
Galaxy Tab A 10.5
Galaxy Tab S2 9.7
Galaxy Tab S3 9.7
Galaxy Tab S4 10.5
Galaxy Tab S6
Galaxy Tab S7
WHAT'S IN THE BOX?
1 x RAM-HOL-TAB28U for the Samsung Tab A Series WITH & WITHOUT case or sleeve
Product Features & Benefits
* The cradle allows you to secure your iPad Mini with its case or sleeve installed
* The cradle is upgradeable if you decide to purchase another tablet
* Securing and removing your iPad Mini takes seconds
* The Cup Ends allow for easy access to ports and buttons
|Compatible with:||Samsung Tab A & 9.7" Tablets|
|Cradle Height:||228.6 mm to 248.45 mm|
|Cradle Width:||139.7 mm to 168.91 mm|
|Cradle Depth:||0.0 mm to 8.0 mm|
|Unit Of Measure||ea|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Be The First To Review This Product!
Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.