RAM B-Sized Ball/Diamond Plate

For 1" B-Sized Arms; works with SeaSucker Vacuum Mounts

Need Extras?

RAM Ball Adapter with 1/4-20 Threaded Post

$24.95

Add to my order

RAM B-Sized Socket Arm

$39.95

Add to my order

RAM 1" Ball Adapter with Round Plate and 1/4-20 Threaded Stud

$39.95

Add to my order

Add To Cart

Calculate Shipping

RAM B-Sized Ball / Diamond Plate

Black diamond-shaped plate used for mounting onto RAM Mount phone holders and hand-held electronics mounts. Rubber coated ball; works with RAM “B”-Sized Socket Arms (approx. 25 mm or 1″ diameter). The plate has pre-drilled holes for screw mounting to the back of RAM phone mounts and GPS brackets.

The RAM B-Sized Ball / Diamond Plate will attach to the housing of all SeaSucker Vacuum Mounts using a 1/4 - 20 grub screw. This provides a solid connection between the housing and the RAM B-Sized Ball / Diamond Plate. You could go one step further and drill a small hole into the housing and insert a self-tapping screw as a locking pin.

If you intend on doing this please contact the team at Gear Campus as we have the required hardware. We can also fit the RAM B-Sized Ball / Diamond Plate onto the housing for at not cost.

WHAT'S IN THE BOX?

1 x RAM B-Sized Ball / Diamond Plate

(RAP-B-238U)

Compatible with RAM “B”-Sized Socket Arms (approx. 25 mm or 1″ diameter)
Compatible with most RAM GPS, Mobile Phone & Smartphone brackets and cradles
Compatible with all Seasucker Vacuum Mounts using a 1/4 - 20 grub screw

SKU	RAP-B-238U
Barcode #	793442802386
Brand	RAM Mounts
Shipping Weight	0.3000kg
Shipping Width	0.030m
Shipping Height	0.065m
Shipping Length	0.060m
Unit Of Measure	mm

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.