Lee's MX Pro Series 30 DEG Centre Rigger Holder

Centre rigger holder for boats with hard tops or towers

Need Extras?

Lee's RK0325DB - DOUBLE Rigging Kit. For FOUR Outrigger Lines to 25 feet

$280.50

Add to my order

Lee's 12 ft Centre Rigger Poles MKII

$407.15

Add to my order

Add To Cart

Calculate Shipping

Free Shipping - $0.00

Lee's Tackle MX Pro Series Fixed 30 DEG Angle Centre Rigger Holder

The MX Pro Series has an internal diameter of 38 mm (1-1/2") and is an ideal solution for boats with towers or when a lower angle is required. It can be easily attached above or below the standing platform or any flat surface.

Cast from marine grade anodized aluminium in Bright Silver the Lee's Centre Rigger has proven to be an effective tool when trolling. This centre rigger should be set at the highest position on the boat. The centre rigger line runs straight down the middle setting the bait/lure farthest back in the trolling spread. The Centre Rigger has been proven to produce more strikes often than not.

The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder and Outrigger Specialist for over 50 years.

WHAT'S IN THE BOX?

1 x Lee's Tackle MX7002CR MX Pro Series Fixed 30 DEG Angle Centre Rigger Holder

(MX7002CR)

**Lee's Tackle MX7002CR MX Pro Series Fixed 30 DEG Angle Centre Rigger Holder**
Internal Diameter:	38 mm (1-1/2")
Footprint Length:	127 mm (5")
Footprint Width:	178 mm (7")

SKU	MX7002CR
Barcode #	96811700062
Brand	Lee's Tackle
Shipping Weight	5.2000kg
Shipping Width	0.580m
Shipping Height	0.480m
Shipping Length	0.530m
Shipping Cubic	0.147552000m3
Unit Of Measure	ea

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.