Lee's 45 DEG Centre Rigger Holder
Centre Rigger for 16 -31 ft fishing boats [AL7211CR]
Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder
The choice of boat manufacturers and consumers around the globe, Lee's Tackle are the Boat Rod Holder and Outrigger Specialist for over 50 years.
Cast from marine grade anodized aluminium and finished in Bright Silver the Lee's Centre Rigger Holder has proven to be an effective centre rigger. It should be set at the highest position on the boat with the rigger line running straight down the middle. This sets the bait/lure farthest back in the trolling spread. The Centre Rigger has been proven to produce more strikes than the outriggers.
The Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder has an internal diameter of 35 mm (1-3/8") and is the ideal solution for 16 ft to 31 ft fishing boats. It has a small footprint of 76 mm (3") x 127 mm (5") and is our most popular centre rigger holder. The receiving tube is set on a 45-degree angle making it the perfect angle for mounting on T-Tops, Hard Tops, or Fly-Bridges.
The Lee's Tackle AL7211CR 45 DEG Centre Rigger Holder is compatible with poles that are 12ft to 14ft in length with a diameter of 35 mm (1-3/8").
WHAT'S IN THE BOX?
1 x Lee's Tackle AL7211CR Fixed 45 DEG Angle Centre Rigger Holder
Product Features & Benefits
- The ideal centre rigger for 16 to 31-foot fishing boats
- Small footprint, can be mounted on T-Tops, Hard Tops, or Fly-Bridges.
- The inclusion of a centre rigger in your lure spread will improve fish strikes
|Internal Diameter:||35 mm (1-3/8")|
|Footprint Length:||76 mm (3")|
|Footprint Width:||127 mm (5")|
|Boat length:||16ft to 31ft|
|Unit Of Measure||ea|
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Be The First To Review This Product!
Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.