Pro 100 9mm Leads; Commodore & HSV LS2 6.0L L76 L98

For the LS2 6.0L L76 L98 found in Commodores & HSV

No Cost Options - The default options are as per below. They can be changed

Available Options
Lead Colour Choice

Calculate Shipping

Startrack 3kg Post Satchel - $16.50

Pro 100 9 mm Leads - Holden Commodore & HSV LS2 L76 L98

The ICE Ignition 9GM829 Pro 100 Series Ignition Leads / Plug Wires suit the 6.0L LS2 found in late VZ to VE Commodores and HSVs. Fitted with a 45-degree coil boot and a Delphie 90 Degree spark plug boot, this is a direct factory replacement.

You can tailor this lead set to suit your needs at no further cost. You can change the following.

Lead Colour: BLACK (default), RED, BLUE

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

More spark means a bigger explosion in the combustion chamber, this improves performance.
ICE Ignition leads / Plug Wires ensure this by minimising resistance in the leads.
They are superconductive with an ultra-low resistance of 100 ohms per metre.
ICE Ignition Leads / Plug Wires are made from high-quality ultra-low resistance spiral wound copper alloy core.
The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
The boots are made from extreme-temperature silicone insulation and can withstand high temperatures.
The ICE Ignition 9GM829 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!
Plug wire markers with an easy-to-install tool included. This ensures correct ignition lead installation.

WHAT'S IN THE BOX?

8 x ICE Ignition 9GM829 Pro 100 Series Ignition Leads
1 x ICE Ignition 2800 Plug Wire Markers
Instruction Sheet
"ICE Ignition Plug Wires" Sticker

(9GM829)

Product Features & Benefits

The ICE Ignition Pro 100 Lead set features:

Spiral wound copper alloy core
Ultra-low resistance of 100 ohms per metre
Delivers maximum spark and duration for improved performance.
Built-in Radio Frequency Interference (RFI) minimization.
All boots made from extreme temperature silicone to withstand high temperatures.
Premium "Snap Lock" stainless steel Spark Plug, Distributor Cap & Coil fittings.
Numbered Lead Markers with easy to install tool to ensure correct lead fitment
Ready to Install Lead Set. No cutting or terminating of leads required.

**ICE Ignition 9GM829 Pro 100 Leads LS2 6.0L L76 L98**
Engine Type:	2006 - 2013 6.0L LS2 L76 L98
Lead Diameter:	9 mm
Lead Colour Choice:	BLACK, RED or BLUE
Lead Resistance:	100 Ohms per metre
RFI Suppressive Leads:	Yes
Lead Conductor:	Spiral wound copper alloy
Spark Plug & Coil Boot Insulation:	Extreme temp.silicone
Coil Boot Type:	45 Degrees
Spark Plug Boot Type:	Delphi 90 Deg (factory)
Lead Markers with install tool:	Included

SKU	9GM829
Brand	ICE Ignition
Shipping Weight	1.2000kg
Shipping Width	0.280m
Shipping Height	0.070m
Shipping Length	0.210m
Shipping Cubic	0.004116000m3
Unit Of Measure	mm
Assembled Length	0.210m
Assembled Height	0.070m
Assembled Width	0.280m

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchanability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.