7 AMP Street Kit - Holden 6, EFI, Forced Induction

This ICE Ignition kit is for ALL Holden 6 Forced Induction engines with EFI that also controls timing. The 7016-2 Control Box does not control timing, it piggybacks off the cars ignition module and enables the ECU to control timing whilst the ICE 7016-2 Control Box generates the ignition spark. This kit is ideal for most street-driven cars.

The ICE Ignition "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market. More spark means greater tuneability which leads to improved performance.

The ICE Ignition controller must be mounted inside your car. Do not mount it inside your engine bay.

ICE Ignition strongly recommends the use of NON-RESISTOR Spark Plugs. If you require assistance with spark plug selection please call us on 1300 722 580. 

 

Why choose the ICE Ignition 7016-2 Kit?

  • The "Digital Inductive Spark" technology delivers the most powerful spark and longest duration of any ignition system on the market.

  • The 7016-2 Kit plugs directly into the car's Ignition Module enabling you to control timing using your car's ECU.

  • It's ideal for most street-driven cars and provides great tuneability.

  • More spark means greater tuneability which leads to improved performance.

  • Three-Year Australian Warranty, made in Melbourne.

What's in the ICE Ignition Kit?

This ignition kit includes the following

  1. 7016-2 Controller - With built-in Voltage Booster 

  2. ICE Ignition SMALL CAP Billet Distributor - Designed to work with all Holden 6 Engines. This distributor will not work unless it's connected to the 7016-2 Control Box. 

    ICE Ignition Pro 100 9 mm Leads / Plug Wires - Please select from the following "No Cost" Options:
    • ICE Ignition 9HOL602 Pro 100 9 mm finished lead set  - Fitment is AS PER THE FACTORY FITMENTIf a different lead fitment is required please call us.

    • ICE Ignition 9MMSTU Pro 100 9 mm DIY set  - A partially finished lead set with the spark plug end terminated and the boots fitted. The leads are cut extra-long.  Lead crimpers are required, they are available as an option.

  3. ICE Ignition 4100 Pro Series Race Coil - With twice the energy of a standard coil the ICE Ignition 4100 Coil is the ideal coil for forced induction engines. 

  4. Wiring Loom - The ICE Ignition wiring loom is approximately 2 metres long and is easy to install. The included instructions detail what is required to connect the ICE Ignition system to your car. If you require a longer wiring loom please call us on 1300 722 580.

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. A 2 year warranty applies where the product is being used primarily in a racing application. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law.

The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchanability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.

Product Features & Benefits

  • You will save money by not having to re-graph your distributor every time you upgrade your engine.
  • More spark and duration delivers greater tuneability leading to improved performance.
  • Avoid engine pinging scenarios through bad fuel by instantly adjusting your engine's timing.

ICE Ignition 7 AMP Kit; Holden 6 with Forced Induction

Engine Type: All Holden 6
Fuel Delivery: Electronic Fuel Injection using ECU
Engine Setup: Turbo, Blown or Supercharged
Controller: 7 AMP Street Series
Controller Features: Built-In 16V Voltage Booster.
Wiring Loom: Included, approx 2 meters long
Distributor Diameter: Approx 4"
Distributor Triggering: Hall Effect Sensor
Distributor Shaft: 4130 Chromoly
Distributor Gear: SG Iron gear for flat tappet cam
Distributor Cap Type: HEI / MALE Post 
Dist. Plug Wire Retainer: Included
Spark Plug Boot Type:  Straight 
Ignition Lead Diameter: 9 mm
Coil Type:  ICE Ignition 4100 Coil
Lead / Plug Wire fitment: Around valve covers
Lead Markers & install tool: Included

 

 

 

 

 

SKU IK70162SNHOL602
Barcode # 2000000004341
Brand ICE Ignition
Shipping Weight 12.0000kg
Shipping Width 0.440m
Shipping Height 0.280m
Shipping Length 0.360m
Shipping Cubic 0.044352000m3
Unit Of Measure ea

What our Customers are Saying


Be The First To Review This Product!

Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.

Write a product review