SeaSucker 2 Tank Rack Vertical Mount

A powerful, convenient tank storage system has never been this simple! Use it on your boat or if you decide to go diving on your friend's boat just take it with you.

The SeaSucker 2 Tank Rack is a truly removable Dive Tank Holder solution and is super quick to install and remove. All it needs is a reasonably smooth and flat surface to attach the two integrated 152 mm SeaSucker Vacuum Mounts. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats. A few pumps on the Vacuum Mount pump is all it takes to install this Dive Tank Holder. Lift the Vacuum Cup tab, and it pops off. To protect the Vacuum Mounts when not in use, press the included Protective Covers over the Vacuum Cups, and you're done.

Two 152 mm Vacuum Mounts, pre-installed on the 508 mm aluminium track, use marine-grade stainless steel hardware to keep your tanks in place.  

Please Note: This product uses the Roll Control Tank Holders and can be optioned with the Fold Down Tank Holders or the Flexible Tank Straps, as shown below

fold-down-tank-holder-dec-2015-no-1.jpgflexible-locking-straps-dec-2015-no-2.png 

"Roll Control - Fold Down Tank Holder" or the "Roll Control - Flexible Tank Strap"

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!! 

Product Benefits & Features

  • You will save on the cost of filling in holes every time, which can get very expensive!
  • The cost of maintaining our vacuum mounts is very low; every part is replaceable, and the pump is fully serviceable.
  • The one solution for many surface including steel, aluminium, glass, fibreglass and some non-skid surfaces.
  • If you change your mind, you can relocate the Dive Tank Rack in seconds and leave no marks behind. ​
WHAT'S IN THE BOX? 
  • Choice of 2 x Adjustable Fold-Down Tank Holders or 2 x Flexible Tank Straps
  • 1 x 502 mm Aluminium Track
  • 2 x 152 mm SeaSucker White Vacuum Mounts (pre-installed)
  • 2 x 152 mm SeaSucker White Protective Covers
  • SeaSucker Vacuum Mount User Guide
  • Some minor assembly required; no tools required

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Product Features & Benefits

  • The only dive tank holder that requires no drilling to mount it
  • Ideal for the part-time diver, convert your boat from fishing to diving in seconds
  • You will save on the cost of repairs by not having to fill in holes, this can get very expensive!
  • The vacuum mount is low maintenance; all parts are replaceable and the pump is serviceable.
  • It will attach to steel, aluminium, glass, fibreglass, painted plaster and some non-skid surfaces.
152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Track Mount Fold-Down Tank Holder Specifications
Overall Width: 508 mm
Overall Height: 152 mm
Overall Depth: 254 mm
Total Number of teeth on each Tank Holder half 16
Minimum internal diameter (all 16 teeth interlocked) 170 mm
External width (all 16 teeth interlocked) 230 mm
Minimum internal diameter (8 teeth interlocked) 220 mm
External width (8 teeth interlocked) 280 mm
Minimum internal diameter (4 teeth interlocked) 250 mm
External width (4 teeth interlocked)  310 mm

 

SKU 5533
Brand SeaSucker
Shipping Weight 2.7000kg
Shipping Width 0.270m
Shipping Height 0.140m
Shipping Length 0.630m
Shipping Cubic 0.023814000m3

Others Also Bought

Recommended Products

What our Customers are Saying


Be The First To Review This Product!

Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.

Write a product review