Tool Holder - Vertical Mount
Stores your knives, pliers and hooks, no holes required
Has storage for 4 Hooks, 3 Pliers & 19 Hooks / Lures
SeaSucker Tool Holder Vertical Mount
You'll never be short of storage for knives, pliers and hooks again no matter where you go. The Tool Holder is made from durable white starboard and has slots for:
- 4 knives;
- 3 pliers; and
- 19 hooks / lures along the front edge.
Mounted on the side is a 114 mm SeaSucker Vacuum Mount with 45 kg of holding power. All it needs is a reasonably smooth and flat surface to attach the integrated SeaSucker 114 mm Vacuum Mount. There is plenty of surface area compatible with our Vacuum Mounts in fibreglass and aluminium boats, cars or around the home. A few pumps on the Vacuum Mount pump is all it takes to install the SeaSucker Tool Holder. Lift the Vacuum Pad tab and it pops off. Mount this Tool Holder on any vertical surface to keep your tools secure.
WHAT'S IN THE BOX?
- The SeaSucker Tool Holder Vertical Mount Kit includes
- 1 x SeaSucker Tool Holder
- 1 x 114 mm SeaSucker White Vacuum Mount (Pre-installed)
- 1 x 114 mm SeaSucker Orange Protective Cover
- SeaSucker Vacuum Mount User Guide
- This kit arrives pre-assembled
(5106)
Product Features & Benefits
- Has storage for 4 knives, 3 pliers & 19 hooks/lures
- Keep your fishing tools close by without drilling holes
- Save money by not having to fill in holes over time, this can get very expensive!
- Save money by not having to buy the same equipment for your next boat.
- The vacuum mount is low maintenance; all parts are replaceable and the pump is serviceable.
- It works on many surfaces including steel, aluminium, glass, fibreglass and non-skid surfaces.
- If you change your mind you can relocate the Tool Holder in seconds and leave no marks behind.
- Going out on your friend's boat and he is short on storage; just take the SeaSucker Tool Holder with you.
Maximum Pull Rating: | 45 kg |
Load Carrying Capacity: | 18.14 kg |
Vacuum Mount Diameter: | 114 mm |
Vacuum Mount Height when mounted: | 45 mm |
Vacuum Mount Height at rest: | 52 mm |
Housing Top Diameter: | 60 mm |
Housing Height Only: | 33 mm |
Housing Top Slot Width: | 7 mm |
Housing Top Slot Length: | 14 mm |
Housing Centre Thread: | ¼-20 |
Length: | 330 mm |
Width: | 114 mm |
Height: | 152 mm |
SKU | 5106 |
Barcode # | 827912084962 |
Brand | SeaSucker |
Shipping Weight | 1.2000kg |
Shipping Width | 0.160m |
Shipping Height | 0.130m |
Shipping Length | 0.270m |
Shipping Cubic | 0.005616000m3 |
Unit Of Measure | ea |
We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.
A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.
Be The First To Review This Product!
Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.
You May Also Like

Go Pro Mount with Long Thumb Knob
$78.95
Or BUY NOW with 4 interest-free fortnightly payments of $19.74
Others Also Bought
More From This Category

114mm SeaSucker Black Vacuum Mount with Stainless
$95.50
Or BUY NOW with 4 interest-free fortnightly payments of $23.88

114mm SeaSucker White Vacuum Mount with Stainless
$95.50
Or BUY NOW with 4 interest-free fortnightly payments of $23.88

Hand Grip with 114mm Vacuum Mount
$89.95
Or BUY NOW with 4 interest-free fortnightly payments of $22.49