Paddle Board / Kayak Roof Rack

Mounts onto the roof of almost any vehicle

WAS $899.00
RRP $999.50
Sale Ends in
15:00 pm, 22 December 2017
Sold Out

More info.

Or BUY NOW with 4 interest-free fortnightly payments of $224.75 .

Free Shipping - $0.00

What's new for the 2017 SeaSucker Paddle Board / Kayak Roof Rack    

The 2017 Paddle Board / Kayak Roof Rack includes the following:      

  1. 2-Year Warranty - All Gear Campus sold Paddle Board / Kayak Roof Racks come with a 2-year warranty. The manufacturer's warranty is 12 months. 
  2. Spare 152 mm Vacuum Mount - Think of it as a spare tyre in case one vacuum mount is accidentally damaged. 
  3. Tools - Allen Key & Ring Spanner is included to assemble the SeaSucker Paddle Board / Kayak Roof Rack.
  4. Alum. Spray Bottle & Micro-Fibre Cloth - Only at Gear Campus. Fill with water, clean your car and the pads & moisten them prior to use.
  5. Redesigned vacuum pumps with impregnated red indicator bands - This prevents fading of the indicator band.

The SeaSucker Paddle Board / Kayak Roof Rack

The SeaSucker Paddle Board Rack has extendable bars that expand from 61 cm to 112 cm. It has six 152 mm SeaSucker Vacuum Mounts with a combined 540 kg of holding power. To ensure your Paddle Board stays put the kit comes with two 3 metre adjustable straps to do the job. To protect your Paddle Board whilst being transported each bar is fitted with 56 cm wrap-around pads.

The SeaSucker Paddle Board / Heavy-Duty Roof Rack is robust enough to carry almost anything. Use it to transport Paddle Boards, Kayaks, Surf Boards or even sheets of wood. This heavy duty roof rack system can transport just about anything at speeds up to 113 km/h (70 mph). Installation takes less than one minute and removal takes only seconds.

No more having to live with an ugly roof rack permanently bolted to your car creating wind noise and hurting your fuel economy. It is the only roof rack system you will ever buy; use it on your car, your friends car, your wife's car and the car you intend to buy in the future. 

The Paddle Board Rack kit also comes with a spare 152mm SeaSucker Vacuum Mount, keep it with your rack in case you accidentally damage one of the vacuum mounts. Some assembly may be required. Tools included: Allen/Hex Key and 7/16″ spanner.  


The SeaSucker Paddle Board Rack Kit includes:

  • Roof Rack Bars - 2 x Extendable Bars, 2 x HPDE platforms & 6 x 152 mm Vacuum Mounts (Pre-installed).
  • Wrap Around Pads - 2 x 56 cm Wrap Around Pads.
  • Tie-Down Straps - 2 x 3,000 mm Adjustable Straps.
  • Spare Tyre - 1 x 152 mm SeaSucker Black Vacuum Mount & Protective Cover.
  • Tools - Allen/Hex Key & 7/16" Spanner.
  • Protective Covers - 7 x 152 mm SeaSucker White Protective Covers.
  • 1 x 5g Lube Tube for pump maintenance.
  • Marine-Grade Stainless Steel Hardware.
  • Instruction Manual.


Product Features & Benefits 

  • You will save money by not having to buy a new roof rack every time you change cars
  • Use the same roof rack on your car, your partner's car or even a rental car
  • The easiest to install roof rack on the market; install it in a few minutes, remove it in seconds.  

Also refer to the SeaSucker Vacuum Mount User Guide for detailed vacuum mount specifications and instructions.

152 mm Vacuum Mount Specifications
Maximum Pull Rating:  90 kg
Load Carrying Capacity: 31.75 kg
Vacuum Mount Diameter: 152 mm
Vacuum Mount Height when mounted: 46 mm
Vacuum Mount Height at rest: 56 mm
Housing Top Diameter:  60 mm
Housing Height Only: 33 mm
Housing Top Slot Width: 7 mm
Housing Top Slot Length: 14 mm
Housing Centre Thread:  ¼-20
Paddle Board Rack Specifications
Minimum Width:  610 mm
Maximum Width:  1,120 mm









SKU SP2106
Barcode # 827912081695
Brand SeaSucker
Shipping Weight 6.2000kg
Shipping Width 0.210m
Shipping Height 0.180m
Shipping Length 0.730m
Unit Of Measure mm

We offer a 1 year, non-transferable warranty covering defects in materials and workmanship. The warranty covers the defective product only and can be returned within 1 year of the date of original purchase to Gear Campus for replacement or repair. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages.

A sales receipt must accompany warranty claims. If your product fails due to a manufacturing or workmanship defect our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If the item has failed due to a manufacturing defect, we will pay the return shipping charges.

Be The First To Review This Product!

Help other Gear Campus users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

3 in 1 Vacuum Mount

3 in 1 Vacuum Mount

$76.45 WAS 89.95

Or BUY NOW with 4 interest-free fortnightly payments of $19.11

Fly Rod Holder

Fly Rod Holder

$101.58 WAS 119.50

Or BUY NOW with 4 interest-free fortnightly payments of $25.39

Large Dry Box - Horizontal Mount

Large Dry Box - Horizontal Mount

$97.71 WAS 114.95

Or BUY NOW with 4 interest-free fortnightly payments of $24.43

Paddle Clip

Paddle Clip

$76.08 WAS 89.50

Or BUY NOW with 4 interest-free fortnightly payments of $19.02

Out Of Stock
SUP Rod Holder

SUP Rod Holder

$161.08 WAS 189.50

Or BUY NOW with 4 interest-free fortnightly payments of $40.27