Custom Pro 100 9 mm Leads; 6Cyl Engine with LS1 Coils

for most 6 Cyl engines with single coil per cylinder

In Stock
Available Options

Need Extras?

Startrack 5kg Post Satchel - $25.30

ICE Ignition Custom 6 Cyl. Leads - Holden VL 3.0L / Nissan RB30 with LS1 Coils

The ICE Ignition 9HOL613-C Pro 100 Ignition Leads will suit most 6 Cylinder engines with LS1 Coils including the Holden VL 3.0LTR / Nissan RB30 with:

  • LS1 Coil PhotoLS1 Coils
  • 45 Degree LS1 Coil Boot 45 Degree Coils or90 Degree Coil Boot90 Degree Coil Boots 
  •                    Straight Spark Plug Boots

If you require an alternative Coil and/or Spark Plug Boot please contact us on 1300 722 580.


Lead Length, "Post to Post" measurement

The leads can be customised to suit your application. When ordering please provide the lead length using the "Post to Post" method. Measure from the post on the spark plug to the intended coil location allowing some slack in the lead. It is better to specify a longer lead length than a shorter one. If you are unsure please contact us on 1300 722 580 and we will assist you.

Please Note: As this is a custom product to suit your application we do not accept returns if you have changed your mind. If you have provided incorrect measurements there will be an additional cost to rectify this. We are here to help. If you are unsure please call us first on 1300 722 580 and we will assist you.

Please provide the lead lengths by using the product options above.

Why choose ICE Ignition Pro 100 9 mm Leads / Plug Wires?

  • More spark means a bigger explosion in the combustion chamber, this improves performance.
  • ICE Ignition leads / Plug Wires ensure this by minimising resistance in the leads.
  • They are super-conductive with an ultra-low resistance of 100 ohms per metre. 
  • ICE Ignition Leads / Plug Wires are made from the high-quality ultra-low resistance spiral wound copper alloy core.
  • The alloy core is wrapped in ICE Ignition's proprietary insulation to provide maximum RF noise & heat shielding.
  • They are fitted with stainless steel "Snap Lock" fittings at the distributor and spark plug ends.
  • The boots are made from extreme temperature silicone insulation and can withstand high temperatures.
  • The ICE Ignition 9HOL613 Ignition Leads / Plug Wires are a finished set of leads. Just plug them in and go!
  • Plug wire markers with an easy to install tool included. This ensures correct ignition lead installation.


  • 6 x ICE Ignition 9HOL613-C Pro 100 Ignition Leads
  • 1 x ICE Ignition 2800 Plug Wire Markers
  • Instruction Sheet
  • "ICE Ignition Plug Wires" Sticker


Product Features & Benefits

The ICE Ignition Pro 100 Lead set features:

  • Spiral wound copper alloy core
  • Ultra-low resistance of 100 ohms per metre 
  • Delivers maximum spark and duration for improved performance.
  • Built-in Radio Frequency Interference (RFI) minimization.
  • All boots made from extreme temperature silicone to withstand high temperatures.
  • Premium "Snap Lock" stainless steel Spark Plug, Distributor Cap & Coil fittings. 
  • Numbered Lead Markers with easy to install tool to ensure correct lead fitment 
  • Ready to Install Lead Set. No cutting or terminating of leads required.

ICE Ignition 9HOL603-C Custom Pro 100 Ignition Leads Holden VL 3.0LTR / RB30

Engine Type: 6 Cyl Engines with LS1 Coils 
Lead Diameter: 9 mm
Lead Resistance: 100 Ohms per metre
RFI Suppressive Leads: Yes
Lead Conductor:  Spiral wound copper alloy
Dist., Spark Plug & Coil Boot Insulation:  Extreme temp. silicone
LS1 Coil Boot Type: 45 Degree or 90 Degree
Spark Plug Boot Type: Straight
Coil Type: LS1 Coils Only
Ignition Lead / Plug Wire Fitment: Custom to suit your application
Lead Markers with easy to install tool: Included











Model # 9HOL613-C
Barcode # 9HOL613-C
Brand ICE Ignition
Shipping Weight 3.2000kg
Shipping Width 0.280m
Shipping Height 0.070m
Shipping Length 0.210m
Unit Of Measure mm

We offer a 3 year, non-transferable warranty covering defects in materials and workmanship if properly installed. If installation instructions have been followed and the product is found to be defective, Gear Campus will replace or arrange for repair if returned along with proof of purchase. As this is a custom product made to suit a specific application we will not accept returns if the customer has changed his mind. This shall constitute the sole remedy of the purchaser and the sole liability of Gear Campus Pty Ltd to the extent permitted by law. The foregoing is exclusive and in lieu of all other warranties or representations whether expressed or implied, including any implied warranty of merchanability or fitness. In no event shall Gear Campus Pty Ltd be liable for special or consequential damages. Products must be returned as originally supplied. Warranty is void if products have been modified or tampered with in any way or installation instructions are not followed.

Be The First To Review This Product!

Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.

Write a product review

You May Also Like

Others Also Bought

More From This Category