2021 Talon - TA Deluxe Kit

The Ideal Bike Rack for Through-Axle Bikes

$743.40
RRP $803.40
SAVE $60.00 (7%)
In Stock

More info.

Or BUY NOW with 4 interest-free fortnightly payments of $185.85 .




Free Shipping - $0.00

What's new for the 2021 SeaSucker Talon - Through-Axle(TA) Deluxe Kit

Introducing the 2021 SeaSucker Talon - Through-Axle Deluxe Kit, it's a SeaSucker Talon with the lot. Aimed at the cycling enthusiast that has a Quick-Release and/or a Through-Axle bike and limited space in the car, the 2021 SeaSucker Talon - Through-Axle Deluxe Kit includes the following:

  1. 2021 SeaSucker Talon - The 2021 SeaSucker Talon kit includes everything you need to transport both a Quick-Release and a Through-Axle bike of your choosing
  2. 2021 SeaSucker Flight Deck - SeaSucker's Front Wheel Holder tat integrates with the SeaSucker Talon Rear Wheel Strap.
  3. SeaSucker HUSKE TA Plugs - Included in this kit is your choice of either 12 mm x 100 mm, 15 mm x 100 mm or 15 mm x 110 mm HUSKE Through-Axle Plugs
  4. SeaSucker Front Wheel Adapter - Used with the Flight Deck, the SeaSucker Front Wheel Adapter converts a Through-Axle front wheel into a Quick-Release front wheel for easy transport.

The SeaSucker Talon Through-Axle Deluxe Kit

The SeaSucker Talon Through-Axle Deluxe Kit includes everything you need to transport one Through-Axle Bike. It also saves space by not having to transport the front wheel inside the car. It is our versatile single bike rack; use it on almost any car with ease. It’s small enough to be taken on board a plane as carry on board luggage. It's powerful enough to be used on interstate trips. That's ideal for cycling holidays when hiring a car at your destination.  

The SeaSucker Talon Through-Axle Deluxe Kit can be installed in under two minutes and removed in seconds; no tools are required. Its ultra-low profile minimizes wind noise and provides greater clearance under carports and garages. It fits easily inside the boot of your car when not in use. 

The SeaSucker Talon Through-Axle Deluxe Kit is a single bike fork-mounted bike rack and uses our incredibly strong 152 mm vacuum mounts each rated to 90 kg direct pull strength. Secure your bike to the roof of your car without the hassle of a permanent bike rack. It can also be mounted on your boot, rear window or your SUV’s back glass.  

SeaSucker vacuum mounts are:  
  • Non-Marking.
  • UV and Weather Resistant.
  • Will attach to Steel, Aluminium, Glass, Fibreglass and Carbon-Fibre surfaces. 
  • 
    

The 19 mm High-Density Polyethylene (HDPE) “L” shaped body conforms to your car’s roof-line. The SeaSucker Talon has three 152 mm SeaSucker vacuum mounts secured to the mainboard with marine-grade stainless steel hardware. Packing a combined direct pull strength of 360 kg the SeaSucker Talon has plenty of muscle and in-built redundancy. 

Included in the kit is one Rear Wheel Strap (152 mm SeaSucker Vacuum Mount with moulded housing and double-sided Velcro strap). It secures your bike’s rear-wheel and keeps it from sliding left or right.  

The SeaSucker Talon comes with one HUSKE Universal Fork Mount Base with 9 mm Quick-Release Plugs and Skewer. The Quick-Release Plugs and Skewer are compatible with any bike that has "Drop Out" front forks. In other words, if you removed the front wheel of your bike expect to find a "Slot" at the bottom of each fork. If so, your bike has a Quick-Release or Drop Out Front Wheel 

 Some minor assembly is required. The supplied tools are Allen/hex Key; and a 7/16″ spanner. 

Like our motto says NO DRILLS!  NO SCREWS!!  NO PROBLEMS!!!

WHAT'S IN THE BOX? 

The SeaSucker Talon Bike Rack - Through-Axle Deluxe Kit includes

  • Main Board - 1 x SeaSucker Talon Main Board with 3 x 152 mm Vacuum Mounts pre-installed
  • HUSKE Universal Fork Mount - 1 x SeaSucker HUSKE Universal Fork Mount Base
  • HUSKE Quick-Release (QR) Plugs & Skewer - For bikes with QR Front Wheels.
  • HUSKE Through-Axle Plugs - Your choice of either 12 mm x 100 mm, 15 mm x 100 mm or 15 mm x 110 mm HUSKE Through-Axle Plugs
  • Flight Deck - Front Wheel Holder that transports your front wheel alongside your back wheel
  • Front Wheel Adapter - Used with the Flight Deck to transport a Through-Axle Front Wheel
  • Rear Wheel Strap - 1 x 152 mm SeaSucker Vacuum Mount with moulded housing and double-sided Velcro strap pre-installed.
  • Crank Arm Strap - 1 x 280 mm x 19 mm Double-sided Velcro strap.
  • Spare Tyre - 1 x SeaSucker Black Vacuum Pump
  • Protective Covers - 4 x 152 mm SeaSucker White Vacuum Mount Protective Covers
  • Cleaning Kit - Aluminium Water Spray Bottle & Micro-Fibre Cloth.
  • Tools - Allen/Hex Key & 7/16" Spanner
  • Marine-grade stainless steel hardware
  • Instruction Manual
  • 5 g Lube Tube for vacuum pump maintenance.

(BT1004-TAD)

Product Features & Benefits

  • The easiest to install bike rack on the market; installed in under 2 minutes, removed within seconds.
  • You will save money with the HUSKE Fork Mount base as it eliminates the need for dedicated fork mounts or adapters
  • You will save money by not having to buy another bike rack when you change cars.
  • You will save money through reduced fuel consumption by not leaving your bike rack permanently installed on your car.
  • Use the SeaSucker Talon on your car, your partner's car and your friend's car.
  • Fantastic for cycling holidays as you can use it on most rental cars.
  • Small enough to be taken on board a plane as carry onboard luggage.
  • The Ultra-low vertical profile gives you more clearance to fit under carports and garages. 
Specifications
SeaSucker Talon Bike Rack Specifications
Bicycle Capacity  1 bicycle only, max. 20 kg
Bike Rack Type:  Fork Mounted (front wheel must be removed)
Vehicle Attachment Location: Roof Top, Boot Lid or Hatchback
Vehicle Surface: Steel, Aluminium, Glass, Fibreglass & Carbon Fibre 
Vehicle Type:  Sedans, SUV's or Minivans
Fork Mount Type:   1 x HUSKE Universal Fork Mount Base
Fork Mount Plugs 1 x HUSKE 9 mm x 100 mm QR Plugs and Skewer
Vacuum Mounts on Main Board:  Three 152 mm SeaSucker Vacuum Mounts 
Number of Rear Wheel Straps: One Rear Wheel Strap with Velcro
Main Board thickness (HDPE):  19 mm
Required vehicle surface length:  (15 inches) - 381 mm (unobstructed)
Required vehicle surface width:  (13 inches) - 330 mm (unobstructed)
Weight:  2.4 kg Approx.
SKU BT1004-TAD
Barcode # 626570608356
Brand SeaSucker
Shipping Weight 5.8000kg
Shipping Width 0.400m
Shipping Height 0.250m
Shipping Length 0.400m
Shipping Cubic 0.040000000m3
Unit Of Measure ea

Be The First To Review This Product!

Help other Gear Campus Pty. Ltd. users shop smarter by writing reviews for products you have purchased.

Write a product review


More From This Category


114mm SeaSucker Black Vacuum Mount

114mm SeaSucker Black Vacuum Mount

$74.95

Or BUY NOW with 4 interest-free fortnightly payments of $18.74

152mm SeaSucker Black Vacuum Mount

152mm SeaSucker Black Vacuum Mount

$94.50

Or BUY NOW with 4 interest-free fortnightly payments of $23.62

114mm SeaSucker Black Replacement Vacuum Pad

114mm SeaSucker Black Replacement Vacuum Pad

$33.95

Or BUY NOW with 4 interest-free fortnightly payments of $8.49

114mm SeaSucker Black Vacuum Mount with Low Profile Housing

114mm SeaSucker Black Vacuum Mount with Low Profil

$74.95

Or BUY NOW with 4 interest-free fortnightly payments of $18.74

114mm SeaSucker Black Vacuum Mount with Stainless Steel D-Ring

114mm SeaSucker Black Vacuum Mount with Stainless

$95.50

Or BUY NOW with 4 interest-free fortnightly payments of $23.88

114mm SeaSucker Rear Wheel Strap

114mm SeaSucker Rear Wheel Strap

$85.50

Or BUY NOW with 4 interest-free fortnightly payments of $21.38

114mm SeaSucker Replacement Protective Cover

114mm SeaSucker Replacement Protective Cover

$9.50

Or BUY NOW with 4 interest-free fortnightly payments of $2.38

114mm SeaSucker White Replacement Vacuum Pad

114mm SeaSucker White Replacement Vacuum Pad

$33.95

Or BUY NOW with 4 interest-free fortnightly payments of $8.49